This item is SHIPPABLE but please ignore any freight cost calculations on this site. They are NOT accurate. Shipping for this item and our other sizes have been in the $125 to $175 range. Send us an email (omnimfg@tds.net) for an exact freight quote. Please Be sure to include your zipcode.
The OMNI Combo 3 point Cultipacker can be used with your tractor give you the maximum germination results in your food plot. Most foodplot seeds require a shallow planting depth. One alternative to expensive drills and row planters is to broadcast seed and then use a cultipacker to press the seed into the prepared soil.
There are many brands and qualities of cultipackers on the market competing for the outdoorsman's dollar. With our cultipacker we are trying to give you the build quality of more expensive implements with pricing at the lower end of the spectrum.
We start with a stout 3/16" x 5" x 3" crossbar and add 1/2" x 8 x 15" end plates. A 1 3/4" solid steel axle is carried in greaseable flange bearings with two offset set screws. Sealmaster American Made bearings are available as a $100 option. A zinc coated locking collar on each end prevents the 9" cultipacker wheels from rubbing on the end plates or bearings. This packer is available with a Cat One 3 point set up or as tow behind with a 36" bar and clevis end. A 3 point/tow behind convertible model is available as a $100 option.. We include the 7/8" lower link pins and one 3/4" top link pin with the 3 point model.
The 48" working width is only 7" inches less than the overall width of the cultipacker itself. The total package weighs in at 350lbs.
We apply two coats of dark gray implement paint over one coat of primer to protect your investment from the elements. Kubota Orange, John Deere Green and Ford/New Holland Blue Enamel Paint is available for an additional $50.
We have the cultipacker wheels drop shipped to you to save shipping costs. The rest of the cultipacker ships UPS Ground from our Minnesota facility. You may also arrange your own shipping or pick up in Pine River, MN. Final assembly requires bolting 3 point tower or tow behind receiver to mainframe with two 3/4" bolts, sliding the cultipacker wheels and locking collars onto the axle and tightening the bearing set screws.
Please email us for a shipping quote. Be sure and include your shipping address with zipcode. Also specify commercial or residential delivery.